Filling Moulding Suppositories & Lipstick
Type -PFM-L

This apparatus is used for moulding suppositories, lipsticks and similar products. This equipment permits melting, agitation and mixing during the filling operation. Stainless steel kettle and agitator are heated by a glycerin bath and 1000 watt heating element. Thermostat permits adjustment of temperature of kettle contents from 20o to 100° C by 1 graduation. The sled, below the filler nozzle, holds any type of mould. It is adjustable in all directions and controlled by a hand wheel. Capacity of kettle is 3.5 liters. Heating jacket requires 2.75 Kg. of glycerin. Production varies with material, moulds etc., but production rates up to 4,000 moulds per hour are not unusual. The pot for filling and moulding suppositories and lipsticks is suitable for screwing on all main motor drive units.

The mould as per the requirement of customer can be designed at extra cost.